Academy X s.r.o. – Slovakia

A. First, check your spam or junk email folders.  Make sure that you are checking the correct email account.  Check the email account that was used to make the purchase through Paypal.  If you are unable to find it, contact us.

Q. Can I purchase multiple licenses for educational purposes at a discount?

A. Yes, but you must order at least 10 licenses.  Bulk educational licenses can be as low as $5 US each.  Contact us to place an order.

Q. Do you offer discount pricing for students?

A.  Yes, but you must first send a scanned student ID card.  Contact us for further details and pricing.

Q. Can I install Artisan on more than one computer?

A.  Yes, if you are an individual, you can install Artisan and register it on all the computers that you yourself own.  If you are a company or organization, you must purchase additional licenses for each computer that Artisan is installed and registered on.  Further details can be found in the end-user license agreement.

Q. Do you accept other forms of payment other than Paypal?

A. Not at this time.  However, our resellers may take other forms of payment.   See the resellers page for more information.

Q. Does Artisan work with my SketchUp version?

A. Artisan is compatible with SketchUp versions 7, 8, and will be compatible with all future versions of SketchUp.  It works with both the free and pro versions of SketchUp.

Q. Can I export geometry created with Artisan to another application?

A. Artisan produces normal SketchUp geometry so you can use the geometry or export it just the same as any other SketchUp entity.

Register Artisan Now! Only $39 US. When you register Artisan, you will be emailed a registration code and detailed instructions for how to remove the time trial limit.

Artisan Plugin – PRODUCT LICENSE INFORMATION

NOTICE TO USERS: CAREFULLY READ THE FOLLOWING LEGAL AGREEMENT.

USE OF THE SOFTWARE PROVIDED WITH THIS AGREEMENT (THE “SOFTWARE”) CONSTITUTES YOUR ACCEPTANCE OF THESE TERMS.
IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, DO NOT INSTALL AND/OR USE THIS SOFTWARE.
USER’S USE OF THIS SOFTWARE IS CONDITIONED UPON COMPLIANCE BY USER WITH THE TERMS OF THIS AGREEMENT.

1. LICENSE GRANT.
The vendor (Dale Martens) grants you a license to use this SOFTWARE in accordance with following terms.

If you are an individual, then you may copy the SOFTWARE and register it onto any computer you own at any location.

If you are an entity, then you may not copy and register the SOFTWARE on any other computer unless you purchase an additional  license or registration for each computer.

“You” means the company, entity or individual whose funds are used to pay the license or registration fee.
“Use” means storing, loading, installing, executing or displaying the SOFTWARE.
You may not modify the SOFTWARE or disable any licensing or control features of the SOFTWARE except as an intended part of the SOFTWARE’s programming features.
When you first obtain a copy of the SOFTWARE, you are granted an evaluation period of not more than 15 days, after which time you must pay for the SOFTWARE according to the terms and prices discussed in the SOFTWARE’s documentation or website to continue use.

This license is not transferable to any other organization or individual.

You are expected to use the SOFTWARE on your system and to thoroughly evaluate its usefulness and functionality before making a purchase.
This “try before you buy” approach is the ultimate guarantee that the SOFTWARE will perform to your satisfaction; therefore, you understand and agree that there is no refund policy for any purchase of the SOFTWARE.

2. OWNERSHIP.
The SOFTWARE is owned and copyrighted by the vendor.
Your license confers no title or ownership in the SOFTWARE and should not be construed as a sale of any right in the SOFTWARE.

3. COPYRIGHT.
The SOFTWARE is protected by Canadian copyright law and international treaty provisions. You acknowledge that no title to the intellectual property in the SOFTWARE is transferred to you.
You further acknowledge that title and full ownership rights to the SOFTWARE will remain the exclusive property of the vendor and you will not acquire any rights to the SOFTWARE except as expressly set forth in this license.
You agree that any copies of the SOFTWARE will contain the same proprietary notices which appear on and in the SOFTWARE.

4. REVERSE ENGINEERING.
You agree that you will not attempt to reverse compile, modify, translate, or disassemble the SOFTWARE in whole or in part.

5. NO OTHER WARRANTIES.
The vendor DOES NOT WARRANT THAT THE SOFTWARE IS ERROR FREE. The vendor DISCLAIMS ALL OTHER WARRANTIES WITH RESPECT TO THE SOFTWARE, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY MAY LAST, OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION.

6. SEVERABILITY.
In the event of invalidity of any provision of this license, the parties agree that such invalidity shall not affect the validity of the remaining portions of this license.

7. NO LIABILITY FOR CONSEQUENTIAL DAMAGES.
IN NO EVENT SHALL the vendor BE LIABLE TO YOU FOR ANY CONSEQUENTIAL, SPECIAL, INCIDENTAL OR INDIRECT DAMAGES OF ANY KIND ARISING OUT OF THE DELIVERY, PERFORMANCE OR USE OF THE SOFTWARE, EVEN IF the vendor HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
IN NO EVENT WILL the vendor’s LIABILITY FOR ANY CLAIM, WHETHER IN CONTRACT, TORT OR ANY OTHER THEORY OF LIABILITY, EXCEED THE LICENSE FEE PAID BY YOU, IF ANY.

8. GOVERNING LAW.
This license will be governed by the laws of the Canada.  The United Nations Convention on Contracts for the International Sale of Goods is specifically disclaimed.

9. ENTIRE AGREEMENT.
This is the entire agreement between you and the vendor which supersedes any prior agreement or understanding, whether written or oral, relating to the subject matter of this license.

Login

To access upgrade pricing, please enter the PayPal email address that you used to purchase Subdivide and Smooth.  Only users who purchased before Feb. 28th 2011 may qualify for upgrade pricing.

Next steps:
1) Download and install Artisan if you have not already done so.
2) Open SketchUp
3) Go to Tools->Artisan->Register
4) Enter your Paypal email and the registration code

Artisan 1.2 is a FREE upgrade for 1.0 customers .  If you have purchased 1.0, you do not need to purchase another registration key.  Your existing 1.X key is still valid.

By downloading, acquiring, or purchasing the software, you agree to the terms of the End-User License Agrement (EULA)

Artisan Plugin version 1.2.0 (includes 15 day free trial for unregistered users)

Download Windows Installer
Download Mac Installer

User Guide (English – web)

User Guide (English – PDF)

Artisan Quick Reference PDF

User Guide (French – web) Translated and Hosted by Pilou

Video Tutorials

Be sure to subscribe to the video tutorials on YouTube to be notified of new tutorials as they are released.

Subdivide and Smooth

Subdivide Selection

Smooth Selection

Crease Tool

Sculpt Brush

Select Brush

Paint Brush

Make Planar

Reduce Polygons

Advanced Sculpting Tools

Register Artisan Now! Only $39 US.  When you register Artisan, you will be emailed a registration code and detailed instructions for how to remove the time trial limit.